When processing for PayPal, this program gathers all information (according to the selections chosen in Credit Card Control F/M (SOF957)).
Processing Details
The system displays the amount, but it cannot be changed on this screen. You can enter the Credit Card Number manually, or by a swipe by pressing the "Swipe" button, or F1. When you press the "Swipe Card" button, FACTS displays a message indicating that it is waiting for the card to be swiped. You can press F4 to cancel. The system remembers the last mode system was in when the credit card information was successfully gathered (swiped or manually entered), and stores this in the SMT record so that the next time you access the Credit Card Information screen, it is in the same mode as last time. The program displays the credit card number in the Credit Card Number field, and other track data into the appropriate fields. The system disables the Credit Card Number and Expiration Date fields after you swipe the credit card. Use the Clear button to clear all fields and enable the Credit Card Number and Expiration Date fields again, and enter the program in the state set by the SMT record (either in swipe mode or manual mode).
Use the following fields to PayPal credit card handling processing in FACTS
Prompts for PayflowPro
1. Credit Card Number
Enter the credit card number either manually or via swipe entry. Note: You can press the Swipe button or F1 to display the Swipe window and the system waits for swipe data. Press F4 or Cancel to cancel the Credit Card transaction and back out of the program.
2. Expiration Date
Enter the expiration date for the credit card, if not populated from swipe.
3. Customer Name
Enter the customer name for the credit card, if not populated from swipe.
4. Address
Enter the customer address for the credit card customer, if not populated from swipe. This field is enabled only if the Use Address Verification Service (AVS) setting is selected on Credit Card Control F/M (SOF957).
5. Zip Code
Enter the zip code for the credit card customer, if not populated from swipe. This field is enabled only if the Use Address Verification Service (AVS) setting is selected on Credit Card Control F/M (SOF957).
6. Card Security Code
Enter the security code for the credit card, if not populated from swipe. This field is enabled if the Use Address Verification Service (AVS) setting is selected on Credit Card Control F/M (SOF957).
You can select from the following buttons
Clear to clear all fields and enable the Credit Card Number and Expiration Date fields again, and enter the program in the state set by the SMT record (either in swipe mode or manual mode).
Swipe or F1 to display the Swipe window and the system waits for swipe data. Press F4 or Cancel to cancel the Credit Card transaction and back out of the program.
Cancel or F4 to exit the PayPal Processing (SOC611) screen.